Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 1578)

9.8 Sample tables ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
1562 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
9 Click on the menu item Edit ▶ Edit line in the dialog window Sample
table.
The dialog window Edit line opens.
10 Select Method from the desired method group, enter Sample data
and click on [Apply].
The sample data entered will be applied in the respective line of the
sample table.
11 Repeat step 8 for each desired determination.
12 Close the dialog window Edit line with [Close].
13 In the dialog window Sample table click on the menu item Sample
table ▶ Save as....
The dialog window Save sample table opens.
14 In the field Name, enter a new name for the sample table or overwrite
the old name.
15 Click on [Save].
The edited sample table is saved.
9.8.3 Loading working sample table
How to proceed?
1 Select program part Workplace.
2 In subwindow Run, click on the Determination series tab.
3 Click on the menu item Sample table ▶ Load....
The dialog window Load sample table opens.
4 Select desired sample table.
5 Click on [Load].
The data of the selected sample table is loaded into the working sample
table.