Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 137)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 3 Workplace
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 121
menu item Delete statistics, whereby the already calculated statistics data
is deleted at the same time.
The second field after Statistics shows the number of determinations still
to be carried out for the statistics (Setpoint counter). In its default settings,
it contains the value Number of single determinations defined in the
START command. This field cannot be edited except in the status
READY and COND BUSY.
Note
When a new statistics series is started, the setpoint counter will be reset
to the value defined in the START command.
3.6.3.5 Single determination - Sample data
Tab:Workplace ▶ Run ▶ Single determination
Method
Entry or selection of the method from the current method group with which
the determination is to be made.
Input 50 characters
Selection Method selection
Open the dialog window Open method for the extended method selection.
If a method is selected in this window from a method group other than the
current one, then this group will henceforth be the current method group
for the quick selection of methods in the Method field. This button is active
only if more than one method group is present.
Note
If a method is changed and saved in the method editor or during reproc-
essing, then the latest method version will be loaded when the program
is restarted.
Note
The following sample data fields can no longer be edited if they were
defined as Fixed value in the method (see Chapter 5.6.2.2.5, page
418).