Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 438)

5.6 Commands ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
422 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
5.6.2.2.6 Send E-mail
Dialog window: Send E-mail
Use E-mail template
on | off (Default value: off)
If this option is enabled, then the E-mail parameters are loaded from an E-
mail template; if not, then these parameters must be entered.
Parameter for "Use E-mail template = on"
Subject
Subject to describe the message.
Input 150 characters
Default value Message from tiamo – Method 'Method name'
– Command 'Command name'
E-mail template
Selection of the template for sending E-mails.
Parameter for "Use E-mail template = off"
Mail to
E-mail address of the recipient.
Input 200 characters
Subject
Subject to describe the message.
Input 150 characters
Default value Message from tiamo – Method 'Method name'
– Command 'Command name'
User
Name of the user for access to mail server. The name need not agree with
the Windows user name.
Input 200 characters
Password
Password for the access to the mail server. This password does not neces-
sarily have to be identical to the Windows password.
Input 200 characters