Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 340)

4.5 Determination overview ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
324 ￭￭￭￭￭￭￭￭ tiamo 2.1 (ProcessLab)
If the cursor is moved to a point then the number, date and value appear as
a tooltip. The sorting and the date and time for the first and last point are
shown as the legend.
[Print (PDF)]
Open dialog window Print control chart (PDF) (see Chapter 4.5.2.19,
page 325). The content of the control chart can be shown as a PDF file in
the required format.
4.5.2.17 Determinations - Overlay curves
Menu item: Database ▶ Determinations ▶ Overlay curves… ▶ Overlay curves
With the menu item Determinations, Overlay curves... or the symbol
the dialog window Overlay curves opens in which overlaid curves of
the selected determinations are shown according to the loaded template.
Template
Selection of a saved template for showing overlaying curves.
Selection Standard | "Template" | Last saved template
Default value Last saved template
If a new template is selected then the display will be
updated automatically.
Note
In the template the Command type is defined for which the overlaying
of curves is possible. Curves from the selected determinations can only be
overlaid when the determination method contains a command with this
Command type (e.g. DET).
Command name
Selection of the command, whose curves are to be displayed with the selec-
ted template.
Selection "Command"
This selection is only necessary if the method contains
several commands of the same Command type.
[Templates]
Open the dialog window Curve overlay templates.
Graphics presentation
Shows the curves according to the settings of the selected template. The
command type (e.g. DET pH) is shown centrally above the graph. At the