Metrohm tiamo 2.1 (ProcessLab) - Manual (Page 403)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Method
tiamo 2.1 (ProcessLab) ￭￭￭￭￭￭￭￭ 387
Note
The method name must be unique in the whole Client/Server system.
[Save]
Save the selected method under the desired method name in the selected
method group.
The method check is automatically carried out before saving the method
- it can also be started manually at any time (see Chapter 5.2.5, page
385). The method is checked as thoroughly as possible. Checks for devices,
sensors and titrants/solutions are not carried out until the start of the method
in order to ensure that method commands for devices etc. which are not
yet configured in the system can be created. If an error is detected during
the method check, a message is displayed asking whether the method
should be saved nevertheless. Faulty methods cannot be started.
A new method version with a new identification is created each time a
modified method is saved (see Chapter 5.3.11, page 399). If the option
Comment on modification of methods is activated in the Security set-
tings
▶ Audit Trail ▶ Changes in the program part Configuration (see
Chapter 6.2.2.4, page 1207), then the window Modification comment
method (see Chapter 5.2.7, page 387) is displayed before the method is
saved.
5.2.7 Modification comment on method
Menu item: Method ▶ File ▶ Save / Save as…
If the option Comment on modification of methods is activated in the
Security settings
▶ Audit Trail ▶ Modifications in the program part
Configuration (see Chapter 6.2.2.4, page 1207) when saving a modified
method or when deleting methods, the dialog window Modification com-
ment method is opened, in which a reason and a comment on the
modification must be entered.
Reason
Selection from the Default reasons defined for the category Modification
of methods in the Security settings dialog window (see Chapter
6.2.2.6, page 1209).
Selection Selection from the Default reasons
Comment
Entry of a comment for modifying the method.
Input 1000 characters