H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 106)

90
Figure 65 Creating an interface
3. Configure the interface as described in Table 37 .
4. Click Apply.
Table 37 Configuration items
Item Description
Interface Name Set the type and number of a logical interface.
VID
If you are creating a Layer 3 Ethernet subinterface, set the VLANs associated with
the subinterface.
This parameter is available only for Layer 3 Ethernet subinterfaces.
IMPORTANT:
Currently, this configuration item is not configurable because the device does not
support Layer 3 Ethernet subinterfaces.
MTU
Set the maximum transmit unit (MTU) of the interface.
The MTU value affects fragmentation and reassembly of IP packets.
IMPORTANT:
Support for this configuration item depends on the interface type. All Layer 3 interfaces
support MTU.