H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 287
271
a.
Select Wireless Service > Access Service from the navigation tree.
b.
Click MAC Authentication List.
c.
On the page that appears, add a local user in the MAC Address field. 0014-6c8a-43ff is used
in this example.
d.
Click Add.
Figure 272 Adding a MAC authentication list
6.
Bind an AP radio to a wireless service
a.
Select Wireless Service > Access Service from the navigation tree.
b.
Click the
icon corresponding to the wireless service mac-auth.
c.
On the page that appears, select the box before ap with radio mode 802.11n(2.4GHz) and
click Bind.
A configuration progress dialog box appears.
d.
After the configuration process is complete, click Close.
Figure 273 Binding an AP radio
7.
Enable 802.11n(2.4GHz) radio
a.
Select Radio > Radio from the navigation tree.
b.
Select the ap 802.11n(2.4GHz) box of the target AP.