H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 128)

112
4. Enter the view name.
5. Click Apply.
The page in
Figure 83 appears.
Figure 83 Creating an SNMP view (2)
6. Configure the parameters as described in Table 49 .
7. Click Add.
8. Repeat steps 6 and 7 to add more rules for the SNMP view.
9. Click Apply.
To cancel the view, click Cancel.
Table 49 Configuration items
Item Description
View Name Set the SNMP view name.
Rule
Select to exclude or include the objects in the view range
determined by the MIB subtree OID and subtree mask.
MIB Subtree OID
Set the MIB subtree OID (such as 1.4.5.3.1) or name (such as
system).
MIB subtree OID identifies the position of a node in the MIB
tree, and it can uniquely identify a MIB subtree.
Subtree Mask
Set the subtree mask.
If no subtree mask is specified, the default subtree mask (all Fs)
will be used for mask-OID matching.
Adding rules to an SNMP view
1. Select Device > SNMP from the navigation tree.
2. Click the View tab.
The page in
Figure 84 appears.
3. Click the icon of the target view.