H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 335)

319
Figure 340 Mesh policy detailed information
Table 107 Field description
Field Description
MP Policy Name Name of the mesh policy.
Mesh Link Initiation Whether link initiation is enabled or not.
Mlsp
Mobile Link Switch Protocol (MLSP) status, which can be:
• Enable—Indicates that MLSP is enabled.
• Disable—Indicates that MLSP is disabled.
Authenticator Role
Authenticator role status, which can be:
• Enable—Indicates that the authenticator role is enabled.
• Disable—Indicates that the authenticator role is disabled.
Max Links Maximum number of links on a device using this mesh policy.
Probe Request Interval (ms)
Interval between probe requests sent by a device using this
mesh policy.
Link Hold RSSI Link hold RSSI.
Link Hold Time (ms) Link hold time.
Link Switch Margin Link switch margin.
Link saturation RSSI Link saturation RSSI.
Link rate-mode
Method of calculating the link cost, which can be:
• Fixed—Indicates that the mesh interface rate is fixed.
• real-time—Indicates that the mesh interface rate changes
with the RSSI in real-time.