Enabling dhcp – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 190
174
Step Remarks
3. Enabling the DHCP server on an interface
Optional.
With the DHCP server enabled on an interface, upon
receiving a client's request, the DHCP server will
assign an IP address from its address pool to the
DHCP client.
With DHCP enabled, interfaces work in the DHCP
server mode.
IMPORTANT:
•
An interface cannot serve as both the DHCP server
and the DHCP relay agent. The latest configuration
takes effect.
•
The DHCP server works on interfaces with IP
addresses manually configured only.
4. Displaying information about assigned IP
Optional.
Enabling DHCP
1.
Select Network > DHCP from the navigation tree to enter the default DHCP Server page shown
in
2.
Select the Enable option on the upper part of the page to enable DHCP globally.
Figure 155 DHCP configuration page