H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 520)

504
Figure 537 Adding an IPv6 ACL
3. Configure the IPv6 ACL information, as described in Table 168 .
4. Click Apply.
Table 168 Configuration items
Item Description
ACL Number Enter a number for the IPv6 ACL.
Match Order
Select a match order for the ACL. Available values are:
• Config—Packets are compared against ACL rules in the order the rules are
configured.
• Auto—Packets are compared against ACL rules in the depth-first match order.
Description Set the description for the ACL.
Configuring a rule for a basic IPv6 ACL
1. Select QoS > ACL IPv6 from the navigation tree
2. Click the Basic Setup tab to enter the rule configuration page for a basic IPv6 ACL, as shown
in
Figure 538 .