H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 356)

340
a. Select Wireless Service > Access Service from the navigation tree.
b. Click the icon corresponding to the wireless service Roam to enter the page for binding
AP radio.
c. Select the box before ap1 with radio type 802.11n(2.4GHz), and the box before ap2 with
radio type 802.11n(2.4GHz).
d. Click Bind.
Figure 372 Binding AP radios
5. Enable dot11g radio:
a. Select Radio > Radio Setup from the navigation tree.
b. On the page that appears, select the box before ap1 with the radio mode 802.11n(2.4GHz),
and select the box before ap2 with the radio mode 802.11n(2.4GHz).
c. Click Enable.
Figure 373 Enabling radio
Verifying the configuration
1. Display the roaming information of the client: