H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 420)

404
b. Select the box before ap1 with the radio mode of 802.11g.
c. Click Enable.
Figure 433 Enabling 802.11g radio
11. Configure portal authentication
a. From the navigation tree, select Authentication > Portal.
b. Click Add.
c. Select interface Vlan-interface2, select Enable Local Server for Portal Server, select Direct as
the authentication method, select the authentication domain test, enter 192.168.1.1 as the
server IP address, select HTTPS as the protocol type, select test as the PKI domain, select the
box before Page Customization, and select the authentication page file ssid1.zip for SSID abc.
d. Click Apply.