H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 206)

190
DHCP relay agent configuration example
Network requirements
As shown in Figure 173 , VLAN-interface 1 on the DHCP relay agent (AC) connects to the network where
DHCP clients reside. The IP address of VLAN-interface 1 is 10.10.1.1/24 and the IP address of
VLAN-interface 2 is 10.1.1.1/24. VLAN-interface 2 is connected to the DHCP server whose IP address is
10.1.1.1/24.
The AC forwards messages between DHCP clients and the DHCP server.
Figure 173 Network diagram
Configuration procedure
NOTE:
Because the DHCP relay agent and server are on different subnets, you must configure a static route or
dynamic routing protocol so they can communicate.
1. Enable DHCP:
a. Select Network > DHCP from the navigation tree.
b. Click the DHCP Relay tab.
c. Select the Enable option for DHCP Service.
d. Click Apply.