H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 613)

597
Figure 633 Network diagram
Configuration procedure
1. Before you configure load balancing, configure AP 1 and AP 2 on the AC to establish a
connection between the AC and each AP.
For the related configuration, see "Configuring access services."
2. Configure load balancing:
a. Select Advanced > Load Balance from the navigation tree.
b. On the Load Balance tab, select Session from the Loadbalance Mode list, enter the threshold 5,
and use the default value for the gap.
c. Use the default values for Max Denial Count and RSSI Threshold.
d. Click Apply..
Figure 634 Configuring session-mode load balancing
3. Configure a load balancing group:
AC
L2 Switch
AP 1 Client 1
Client 4
Client 5
Client 3
Client 2
AP 2
AP 3
Client 7