H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 141)

125
SNMPv3 adopts a security mechanism of authentication and privacy. You must configure username and
security level. According to the configured security level, you must configure the related authentication
mode, authentication password, privacy mode, privacy password, and so on.
You must also configure the aging time and retry times. After these configurations, you can configure the
device as needed through the NMS. For more information about NMS configuration, see the manual
provided for NMS.
Verifying the configuration
• After the above configuration, an SNMP connection is established between the NMS and the agent.
The NMS can get and configure the values of some parameters on the agent through MIB nodes.
• If an idle interface on the agent is shut down or brought up, the NMS receives a trap information
sent by the agent.