H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 137)

121
Figure 95 Enabling SNMP
2. Configure an SNMP view:
a. Click the View tab.
b. Click Add.
The page in
Figure 96 appears.
c. Enter view1 in the field.
d. Click Apply.
The page in Figure 97 appears.
e. Select the Included radio box, enter the MIB subtree OID interfaces, and click Add.
f. Click Apply.
A configuration progress dialog box appears.
g. Click Close after the configuration process is complete.
Figure 96 Creating an SNMP view (1)