Auto, Enabling radio, Configuring a peer mac address – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 338
322
Auto
Set the working channel mode on the MPP and MAP to auto so that the working channel is automatically
negotiated when a WDS link is established between the MPP and MAP.
NOTE:
If you configure the working channel mode of the radios of the MPP and MAP as auto, the automatically
selected working channel is a non-radar channel.
Enabling radio
1.
Select Radio > Radio from the navigation tree to enter the radio setup page.
Figure 344 Enabling radio
2.
Select the radio mode to be enabled.
3.
Click Enable.
Configuring a peer MAC address
1.
Select Wireless Service > Mesh Service from the navigation tree.
2.
Click
to enter the page for binding an AP radio to a mesh service.
3.
Select the AP radio to be bound, and click the
icon to enter the page for configuring a peer
MAC address.