H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 230)

214
Configuring an AP
Creating an AP
1. Select AP > AP Setup from the navigation tree.
2. Click Add to enter the page for adding an AP.
Figure 202 Adding an AP
3. Create the AP as described in Table 81 .
4. Click Apply.
Table 81 Configuration items
Item Description
AP Name AP name.
Model AP model.
Serial ID
• Auto—If selected, the AC automatically searches the AP serial ID. This function is
used together with the auto AP function. For how to configure auto AP, see
" Configuring auto AP ."
• Manual—If this mode is selected, you need to type an AP serial ID.
Configuring an AP
1. Select AP > AP Setup from the navigation tree.
2. Click the icon corresponding to the target AP to enter the page for configuring an AP.