H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 530)

514
Figure 544 Adding a class
3. Configure the class information, as described in Table 174 .
4. Click Add.
Table 174 Configuration items
Item Description
Classifier Name Specify a name for the classifier to be added.
Operator
Specify the logical relationship between rules of the classifier.
• And—Specifies the relationship between the rules in a class as logic AND. The
device considers a packet belongs to a class only when the packet matches all the
rules in the class.
• Or—Specifies the relationship between the rules in a class as logic OR. The device
considers a packet belongs to a class as long as the packet matches one of the
rules in the class.
Configuring classification rules
1. Select QoS > Classifier from the navigation tree.
2. Click the Setup tab to enter the page for setting a class, as shown in Figure 545 .