H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 615)

599
Figure 636 Network diagram
Configuration procedure
1. Before you configure load balancing, configure AP 1 and AP 2 on the AC to establish a
connection between the AC and each AP.
For the related configuration, see "Configuring access services."
2. Configure load balancing:
a. Select Advanced > Load Balance from the navigation tree.
b. On the Load Balance tab, select Traffic from the Loadbalance Mode list, enter the threshold 10
and the gap 40.
c. Use the default values for Max Denial Count and RSSI Threshold.
d. Click Apply.