Remote 802.1x authentication configuration example, Network requirements, Configuring the ac – H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 300
284
Remote 802.1X authentication configuration
example
Network requirements
Perform remote 802.1X authentication on the client.
•
Use the IMC as a RADIUS server for AAA. On the RADIUS server, configure the client's username
as user, password as dot1x, and shared key as expert. The IP address of the RADIUS server is
10.18.1.88.
•
On the AC, configure the shared key as expert, and configure the AC to remove the domain name
of a username before sending it to the RADIUS server. The IP address of the AC is 10.18.1.1.
Figure 293 Network diagram
Configuring the AC
1.
Assign an IP address to the AC:
a.
Select Network > VLAN to create a VLAN on the AC.
b.
Select Device > Interface Management to assign an IP address to the VLAN interface.
2.
Configure a RADIUS scheme:
a.
Select Authentication > RADIUS from the navigation tree.
b.
Click Add.
c.
On the page that appears, add two servers in the RADIUS Server Configuration, and specify
the key expert.
d.
Enter 802.1x in the Scheme Name field.
e.
Select the server type Extended, and select Without domain name from the Username Format
list.
f.
Click Apply.