H3C Technologies H3C WX3000E Series Wireless Switches - Manual (Page 521)

505
Figure 538 Configuring a rule for a basic IPv6 ACL
3. Configure the basic IPv6 ACL rule information, as described in Table 169 .
4. Click Add.
Table 169 Configuration items
Item Description
Select Access Control List
(ACL) Select the basic IPv6 ACL for which you want to configure rules.
Available ACLs are basic IPv6 ACLs.
Rule ID
Select the Rule ID option and enter a number for the rule.
If you do not specify the rule number, the system will assign one automatically.
IMPORTANT:
If the rule number you specify already exists, the following operations modify the
configuration of the rule.
Operation
Select the operation to be performed for IPv6 packets matching the rule.
• Permit—Allows matched packets to pass.
• Deny—Drops matched packets.
Check Fragment
Select this option to apply the rule to only non-first fragments.
If you do no select this option, the rule applies to all fragments and non-fragments.
Check Logging
Select this option to keep a log of matched IPv6 packets.
A log entry contains the ACL rule number, operation for the matched packets,
protocol that IP carries, source/destination address, source/destination port
number, and number of matched packets.