H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 440
424
Item Description
Stop-Accounting
Attempts
Set the maximum number of stop-accounting attempts.
The maximum number of stop-accounting attempts, together with some other
parameters, controls how the NAS deals with stop-accounting request packets.
Suppose that the RADIUS server response timeout period is three seconds, the
maximum number of transmission attempts is five, and the maximum number of
stop-accounting attempts is 20. For each stop-accounting request, if the device
receives no response within three seconds, it retransmits the request. If it receives no
responses after retransmitting the request five times, it considers the stop-accounting
attempt a failure, buffers the request, and makes another stop-accounting attempt.
If 20 consecutive attempts fail, the device discards the request.
Send accounting-on
packets
Enable or disable the accounting-on feature.
The accounting-on feature enables a device to send accounting-on packets to
RADIUS servers after it reboots, making the servers forcedly log out users who
logged in through the device before the reboot.
IMPORTANT:
When enabling the accounting-on feature on a device for the first time, you must save
the configuration so that the feature takes effect after the device reboots.
Accounting-On Interval
Set the interval for sending accounting-on packets. This field is configurable only
when the Send accounting-on packets option is selected.
Accounting-On Attempts
Set the maximum number of accounting-on packets transmission attempts. This field
is configurable only when the Send accounting-on packets option is selected.
Attribute
Enable or disable the device to interpret the RADIUS class attribute as CAR
parameters.
Interpretation
7.
In the RADIUS Server Configuration area, click Add to enter the RADIUS server configuration page.
Figure 448 RADIUS server configuration page
8.
Configure a RADIUS server for the RADIUS scheme as described in
9.
Click Apply to add the server to the RADIUS scheme.
10.
Repeat step 7 through step 9 to add more RADIUS servers to the RADIUS scheme.
11.
On the RADIUS scheme configuration page, click Apply.