H3C Technologies H3C WX3000E Series Wireless Switches User Manual
Page 295
279
a.
Select Wireless Service > Access Service from the navigation tree.
b.
On the page that appears, select the mac-auth box.
c.
Click Enable.
A configuration progress dialog box appears.
d.
After the configuration process is complete, click Close.
Figure 284 Enabling the wireless service
8.
Bind an AP radio to the wireless service:
a.
Select Wireless Service > Access Service from the navigation tree.
b.
Click the
icon corresponding to the wireless service mac-auth.
c.
Select the box of the AP with the radio mode 802.11n(2.4GHz).
d.
Click Bind.
A configuration progress dialog box appears.
e.
After the configuration process is complete, click Close.
Figure 285 Binding an AP radio to a wireless service
9.
Enable 802.11n(2.4GHz) radio:
a.
Select Radio > Radio from the navigation tree.
b.
Select the ap 802.11n(2.4GHz) box of the target AP.