Freescale Semiconductor Microcontrollers - Manual (Page 146)

Debugger Components
Visualization Utilities
146 Microcontrollers Debugger Manual
Instruments
When you first add an instrument, it is in “move mode”. Place it at the desired location on
the workspace. All new instruments are set to their default attributes. To configure an
instrument, right-click on an instrument and choose Properties, or double click on it. All
instruments have the common attributes shown in
Table 3.46 .
:
Table 3.46 Instruments Properties Attributes
Attribute Description
X-Position Specifies the X-coordinate of the upper left corner.
Y-Position Specifies the Y-coordinate of the upper left corner.
Height Specifies the instruments height.
Width Specifies the instruments width.
Bounding
Box Specifies the look of the bounding box.
Available displays are: No Box, Flat (outline only), Raised, Sunken,
Etched, and Shadowed.
Background
color Defines the color of the instrument’s background. The checkbox enables
to set a color or let the instrument be transparent.
Kind of Port Specifies the kind of port to be used to get the value to display. The
location must be specified in the Port to Display field.
Port to
Display Defines the location of the value be used for the instrument’s
visualization.
Here are some Examples:
Substitute: TargetObject.#210
Subscribe: TargetObject.#210
Subscribe: PORTB.PORTB (check exact spelling using Inspector)
Variable: counter
Register: SP
Memory: 0x210
Size of Port If you use the Memory Port, you can also specify the width of memory to
display (up to 4 Bytes).