Freescale Semiconductor Microcontrollers - Manual (Page 482)

HCS08 Open Source BDM Connection
First Steps From Within an Existing Project
482 Microcontrollers Debugger Manual
HCS08 Open Source BDM Setup Dialog
Box
This dialog box is used for setting up communication with a communication device. The
Communication Device list menu shows which OSBDM cables are plugged into the
computer.
Figure 20.5 HCS08 Open Source BDM Setup Dialog Box
Select the desired cable as your communication device, then click the OK button to start
debugging.
The Show Protocol checkbox option is only for support usage. Select this checkbox, when
you want the debugger’s internal information reported in the Command window.
TIP Cables are numbered #1, #2, etc. in the order they have been plugged into the
computer USB hub.