Freescale Semiconductor Microcontrollers - Manual (Page 394)

HC08 ICS P&E Multilink/Cyclone Pro Connections
Device Class Description
394 Microcontrollers Debugger Manual
Class 8 Device
P&E’s Cyclone Pro communicates with the PC through a Serial, Ethernet or USB port.
One can use the Cyclone Pro to debug and program the firmware inside of Freescale
M68HC08 microprocessors via a standard 16-pin MON08 ribbon cable. The Cyclone Pro
can provide its own power and clock signals to the target, as long as proper signals are
connected to the corresponding pins of the 16-pin MON08 header.
In addition, the Cyclone Pro can be used for programming and debugging the M68HC12/
M68HCS12/M68HCS08 Freescale microprocessors via a standard 6-pin ribbon cable. To
take advantage of this functionality, connect proper signals to the standard 6-pin
Background Debug Module header.