Freescale Semiconductor Microcontrollers - Manual (Page 422)

HC08 FSICEBASE Emulator
Bus State Analyzer (BSA)
422 Microcontrollers Debugger Manual
To define an event:
1. Start the debugger
2. Load the program to debug
a. If you launched the debugger from a project in the CodeWarrior IDE, the debugger
automatically loads the program (.abs or .elf file)
b. If the debugger has not loaded the program that you want to debug:
• From the debugger main menu, select File > Load Application
• Specify the location of the executable program file (.abs or .s19 file)
• Click Open — debugger loads the application you specified
3. From debugger main menu, select FSCICEBASE-HC08
The FSICEBASE-HC08 menu is between the Run menu and the Component menu. If
you do not see the FSICEBASE-HC08 menu, you need to specify the connection. For
more information on specifying a connection see
Specifying A Connection .
4. Select Bus Analyzer Configuration — Bus Analyzer Configuration dialog box opens
( Figure 17.10 )
Figure 17.10 Bus Analyzer Configuration Dialog Box