Freescale Semiconductor Microcontrollers - Manual (Page 568)

SofTec RS08 Connection
First Steps Using the Stationery Wizard
568 Microcontrollers Debugger Manual
First Steps Using the Stationery Wizard
To take the first steps toward debugging with the CodeWarrior IDE and the SofTec
inDART-RS08 using the stationery Wizard:
1. Run the CodeWarrior IDE with the shortcut created in the program group.
2. In the Microcontrollers New Project Wizard, follow the path to create a new project,
naming the project.
3. Click the Next button to open the New Project window.
4. In the Microcontrollers New Project window, select the RS08 Family chip you are
working with from the list in the Derivative list box in the left of the window.
Figure 27.1 Wizard Connection Selection
5. From the Default Connection list box, choose the connection SofTec RS08 to create a
new project from this stationery.
6. Click the Finish button - IDE opens as shown in Figure 27.2 on page 569 .