Freescale Semiconductor Microcontrollers - Manual (Page 749)

Debugger Engine Commands
Debugger Commands
749 Microcontrollers Debugger Manual
The MODE command selects the display mode of variables.
• In Automatic mode (default), variables are updated when the target is stopped.
Variables from the currently executed module or procedure are displayed in the
data component. Variables are updated when target is stopped.
• In Locked and Frozen mode, variables from a specific module are displayed in
the data component. The same variables are always displayed in the data
component.
• In Locked mode, values from variables displayed in the data component are
updated when the target is stopped.
• In Frozen mode, values from variables displayed in the data component are not
updated when the target is stopped.
• In Periodical mode, variables are updated at regular time intervals when the
target is running. The default update rate is 1 second, but it can be modified by
steps of up to 100 ms using the associated dialog box or the UPDATERATE
command.
The UPDATERATE command sets the variables update rate (see also
UPDATERATE command).
The SPROC (show procedure) and SMOD (show module) commands display
local or global variables of the corresponding procedure or module.
The SCOPE command selects and displays global, local or user defined variables.
The COMPLEMENT command sets the display complement format of Data
values: one sets the first complement (each bit is reversed), none deselects the first
complement.
The NAMEWIDTH command sets the length of the variable name displayed in
the window.
NOTE Refer to SPROC , UPDATERATE and SMOD command descriptions for more
detail about these commands.
Equivalent Operations
• ATTRIBUTES FORMAT ~ Select menu Data > Format
• ATTRIBUTES MODE ~ Select menu Data > Mode
• ATTRIBUTES SCOPE ~ Select menu Data > Scope
• ATTRIBUTES SPROC ~ Drag and drop from Procedure component to Data
component.
• ATTRIBUTES SMOD ~ Drag and drop from Module component to Data
component.