Freescale Semiconductor Microcontrollers - Manual (Page 694)

ColdFire On-Chip DBG Module
Trigger Module Settings Window
694 Microcontrollers Debugger Manual
Expert Mode
The Expert mode is a “Do It Yourself” interface to set the on-chip DBG module. In that
case, the debugger does not use any on-chip module resources. Refer to silicon
specifications to correctly set up the DBG module. The debugger still provides the Trace
rebuild window and support to display, when available, the results of the captured data.
Enhanced setup
The ABxR (hex) edit box setup combines ABHR and ABLR registers setup.
Set the CSR2 register using the Mode and Start/Stop list menu, or by using the Select
button.
Figure 31.9 Expert Trigger Settings: CSR2 interactive translation of recording mode
Setting CSR2 by using the Select button automatically updates the Mode and Start/Stop
list menu selection, and vice versa.