Freescale Semiconductor Microcontrollers - Manual (Page 658)

ColdFire V1 Full Chip Simulation Connection
FCS Tutorials
658 Microcontrollers Debugger Manual
Figure 28.78 Project Window - Processor Expert Tab
Under Beans you can find the previously created bean with the name
AS1:AsynchroSerial.
Step 6 - Bean Inspector AS1:AsynchroSerial
Window
In this window you can modify the behavior of the bean to suit your needs. General
settings are in the Properties tab. Software drivers are located under the tab Methods and
Events.
• Select Properties tab
• Enter a proper baud rate. If you want to run it on real hardware check your board
manual for the right value. If you want to run it in FCS only you can enter 9600.