Freescale Semiconductor Microcontrollers - Manual (Page 219)

219 Microcontrollers Debugger Manual
9
Synchronized Debugging
Through DA-C IDE
This chapter provides information on how to use and configure Freescale tools within the
Development Assistant for C (DA-C) IDE. For more information on DA-C, refer to the
Development Assistant for C documentation v 3.5.
You must be running:
DA-C - version 3.5 build 555 or later - (Development Assistant for C - RistanCASE).
Topics in this chapter include:
• Configuring DA-C IDE for Freescale Tool Kit
• Debugger Interface
• Synchronized Debugging
• Troubleshooting
Configuring DA-C IDE for Freescale Tool Kit
Install the DA-C software. The Freescale CD contains a demo version located in
\Addons\DA-C
. Run Setup to install the Typical installation.
A few configurations are required in order to make efficient use of Freescale Tools within
DA-C IDE.
• Create a new project
• Configure the working directories
• Configure the file types
• Configure the Freescale library path
• Adding files to project
• Building the Database
• Configure the tools
In the following sections, we assume that the Freescale tool kit is installed in the
C:\Program Files\Freescale
directory. You may have to adapt the paths to your