Freescale Semiconductor Microcontrollers - Manual (Page 719)

Debugging Memory Map
The DMM GUI
719 Microcontrollers Debugger Manual
Figure 33.3 DMM Type selection
NOTE CPU core-specific memory types and Priorities are listed at the end of this
section.
Priorities
The Priority list menu provides all types of memory overlap priorities available for a
processor core. The debugger can have a bigger priority (highest (debugger)) to set an
upper address range that can overlap an on-chip address range. This makes a debugger
display filter (for a Memory window), e.g. when creating a No read access while running
memory address range.
A Flat memory architecture (i.e., without memory blocks moving feature) provides the
following Priority list menu (e.g. HCS08 and ColdFire cores):
Figure 33.4 HCS08 or ColdFire Core Priorities
When left at the default setting, the CPU treats all memory block with the same priority.