Freescale Semiconductor Microcontrollers - Manual (Page 354)

ICS MON08 Interface Connection
Connection Procedure
354 Microcontrollers Debugger Manual
Figure 13.5 Power Down Dialog Box
3. Software automatically powers up the ICS, which configures the processor’s MON08
configuration pins.
4. Software asks the user to power up the board as follows:
Figure 13.6 Power Up Dialog Box
Cycle Power Radio Button
Power Down ICS button asks the user to power cycle their board. Power UP ICS button
does the opposite.
This option works for many ICS boards as well, but relies on the fact that while the ICS is
powered off, it holds the target in reset until it is powered up itself and has configured the
MON08 configuration pins. The sequence of events in this mode is:
1. Software automatically powers down the ICS.
2. Software asks the user to power cycle their board as follows:
Figure 13.7 Power Cycle Dialog Box
3. Software automatically powers up the ICS, which configures the processors MON08
configuration pins.