Freescale Semiconductor Microcontrollers - Manual (Page 253)

253 Microcontrollers Debugger Manual
11
HC08 Full Chip Simulation
Full Chip Simulation (FCS) connection runs a complete simulation of all processor
peripherals and I/O on the user's Personal Computer. Because of this it does not require an
MCU development board to be connected to your PC. Each derivative has a totally
different simulation engine to accurately simulate the memory ranges, I/O, and peripherals
for a given derivative (for more information on selecting a specific derivative, see the
Select Device Option section below.
Configuration Procedure
Choose the Full Chip Simulation option from the Set Connection dialog box. See Figure
11.1 .
Figure 11.1 Set Connection Dialog Box - Full Chip Simulation Option
When you have selected this option, the Connection list menu becomes the HCS08FCS
Menu, and appears as shown in
Figure 11.2 .