Freescale Semiconductor Microcontrollers - Manual (Page 249)

Microcontroller Debugging First Steps
Switching Connections
249 Microcontrollers Debugger Manual
The Set Connection dialog box now appears.
Figure 10.12 Set Connection Dialog Box - Connection Menu
2. Within the Set Connection dialog box, press the Down Arrow button next to the
Connection list box to display the list of available connections.
3. Select P&E Multilink/Cyclone Pro.
The Connection menu selection P&E Multilink/Cyclone Pro loads the proper drivers, etc.
for the connection.
4. In the Debugger Main window, the Connection heading has been renamed
MultilinkCyclonePro. Click on this heading to display its menu and list of selections.
Figure 10.13 MultilinkCyclone Pro Menu
The menu selection MultilinkCyclonePro > Load loads an executable (.abs) file into
connection memory. The file’s program counter points to the first instruction of the startup
section.
The menu selection MultilinkCyclonePro > Reset triggers a reset of the connection and
executes the command file reset.cmd.