Freescale Semiconductor Microcontrollers - Manual (Page 846)

Debugger Engine Environment Variables
Local Configuration File (usually project.ini)
846 Microcontrollers Debugger Manual
Example:
Window5=Memory 50 60 50 30
Window number 5 is a Memory component, its starting position is at: 50% from main
window width, 60% from main window height. Its width is 50% from main window width
and its height 30% from main window height.
Other Parameters
• It is possible to load a previously saved layout from a file by inserting the following
line in your PROJECT.INI file:
Layout=<LayoutName>
Where LayoutName is the name of the file describing the layout to be loaded, for
example, Layout=lay1.hwl
NOTE The layout path can be specified if the layout is not in the project directory.
NOTE If Layout is defined in PROJECT.INI, the Layout parameter overwrites any
Window<n> definition, describing the default windows layout.
• It is possible to load a previously saved project from a file by inserting the following
line in your PROJECT.INI file:
Project=<ProjectName>
where ProjectName is the name of the file describing the project to be loaded,
for example, Project=Proj1.hwc
NOTE The project path can be specified if the project is not in the project directory.
This option can be used for compatibility with the old .hwp format
(Project=oldProject.hwp) and opens as a new project file.
See File Menu section for more details about Projects.
NOTE If Layout and Project are defined in PROJECT.INI, the Project parameter
overwrites the Layout parameter, also containing layout information.
MainFrame=<nbr.>,<nbr.>,<nbr.>,<nbr.>,<nbr.>,<nbr.>,
<nbr.>,<nbr.>,<nbr.>,<nbr.>
This variable is used to save and load the Debugger main window states: positions, size,
maximized, minimized, display icons when opened, etc. This entry is used for internal
purposes only.