Freescale Semiconductor Microcontrollers - Manual (Page 865)

865 Microcontrollers Debugger Manual
37
Legacy PEDebug Target
Interface
The PEDebug Target Interface has become “Legacy” and has been replaced by specific
Debugger Connections. The Target Interface term has been replaced by the term
Connection.
New P&E Connections for HC(S)08
For the HC08 CPU, the following P&E connections have been created to replace the
former Target Interfaces:
• Full Chip Simulation Connection
• Mon08 Interface Connection
• ICS Mon08 Interface Connection
• P&E Multilink/Cyclone Pro Connection
• ICS P&E Multilink/Cyclone Pro Connection
For the HCS08 CPU, the P&E following connections have been created:
• Full Chip Simulation Connection
• P&E Multilink/Cyclone Pro Connection
Refer to specific manual chapter to get further details about each connection.
“Revert to Full Chip Simulator” Feature
Removed
These new connections NO LONGER revert to the default FCS when the hardware cannot
be contacted. It is now necessary to open the Set Connection dialog box and to choose the
FCS if that is the connection you want. The FCS is now a Connection with the same
priority as any other connection.