Freescale Semiconductor Microcontrollers - Manual (Page 337)

MON08 Interface Connection
Connection Procedure
337 Microcontrollers Debugger Manual
Power Up and Power Down Radio Buttons
This is the default option and works for most, if not all, ICS08/Target Board solutions. It
requires the user go through two dialog box stages, and requires more time than simply
cycling the power.
1. Software automatically powers down the ICS.
2. Software asks the user to power down the board as follows:
Figure 12.5 Power Down Dialog Box
3. Software automatically powers up the ICS, which configures the processor’s MON08
configuration pins.
4. Software asks the user to power up the board as follows:
Figure 12.6 Power Up Dialog Box