Freescale Semiconductor Microcontrollers - Manual (Page 330)

HC08 Full Chip Simulation
Configuration Procedure
330 Microcontrollers Debugger Manual
Figure 11.67 USB IN Buffer Display
USBOUT Command
The USBOUT command displays the output buffer from the USB. A window is opened
that shows all the data that the USB has shifted out. An arrow is used to point to the last
output packet transmitted. The maximum number of output packets that the buffer holds is
256 bytes.
Syntax
>USBOUT
Example
>USBOUT
View packets from the output buffer for USB simulation.
Figure 11.68 USB OUT Buffer Display