Freescale Semiconductor Microcontrollers - Manual (Page 370)

HC08 P&E Multilink/Cyclone Pro Connection
Connection Procedure
370 Microcontrollers Debugger Manual
3. Software automatically powers up the ICS, which configures the processor’s MON08
configuration pins.
4. Software asks the user to power up the board as follows:
Figure 14.9 Power Up Dialog Box
Cycle Power Down/Up Radio Button
These buttons ask the user to power cycle their board.
This option works for many ICS boards as well, but relies on the fact that while the ICS is
powered off, it holds the target in reset until it is powered up itself and has configured the
MON08 configuration pins. The sequence of events in this mode is:
1. Software automatically powers down the ICS.
2. Software asks the user to power cycle their board as follows:
Figure 14.10 Power Cycle Dialog Box
3. Software automatically powers up the ICS, which configures the processor’s MON08
configuration pins.
Serial Port Stop Bits
Serial Port Stop Bits allow users of Class 1-4 devices that are experiencing unreliable
communication to increase the number of stop bits to 2.