Freescale Semiconductor Microcontrollers - Manual (Page 251)

Microcontroller Debugging First Steps
Switching Connections
251 Microcontrollers Debugger Manual
Loading the HC(S)08 or RS08 Open Source
BDM Connection
To switch to either the HC(S)08 or RS08 Open Source BDM Connection follow these
steps:
1. From the Debugger main menu, select Component | Set Connection, as shown below.
Figure 10.16 Component Menu
The Set Connection dialog box appears.
Figure 10.17 Set Connection Dialog Box
2. Select the Processor and Connection, for example, RS08 and RS08 Open Source
BDM.
NOTE Select HC08 as the Processor to select HC08 Open Source BDM as the
Connection.