Freescale Semiconductor Microcontrollers - Manual (Page 409)

HC08 FSICEBASE Emulator
Setting Up the System
409 Microcontrollers Debugger Manual
4. From debugger main menu, select FSICEBASE-HC08
5. Select Communication— Communication dialog box appears ( Figure 17.1 )
6. Select USB
7. Click OK
The debugger connects to the FSICEBASE through the USB port.
Setting Up the System
In order to use the Freescale In-Circuit Emulator Base (FSICEBASE), you need to make
sure that the system is configured properly. Configuring the FSICE system includes:
• Specifying A Connection
• Specifying Communication Information
• Assigning an IP Address to FSICEBASE
• Specifying a Memory Map
• Specifying the Clock Speed
Specifying A Connection
To specify the connection, including the specific derivative:
1. Start the debugger — the True-time Simulator & Real-time Debugger window
appears.
2. From debugger main menu, select Component
3. Select Set Connection from the Component menu — Set Connection dialog box
opens
Figure 17.2 Set Connection Dialog Box