Freescale Semiconductor Microcontrollers - Manual (Page 386)

HC08 ICS P&E Multilink/Cyclone Pro Connections
Connection Procedure
386 Microcontrollers Debugger Manual
Power Up/Down Radio Buttons
Power Down ICS prompts the user to power down the board. Power Up ICS prompts the
user to power up the board.
This is the default option and works for most, if not all, ICS08/Target Board solutions.
1. Software automatically powers down the ICS.
2. Software asks the user to power down the board as follows:
Figure 15.7 Power Down Dialog Box
3. Software automatically powers up the ICS, which configures the processor’s MON08
configuration pins.
4. Software prompts the user to power up the board as follows:
Figure 15.8 Power Up Dialog Box