Freescale Semiconductor Microcontrollers - Manual (Page 94)

Debugger Components
General Debugger Components
94 Microcontrollers Debugger Manual
Word Size Submenu
With the Word Size submenu shown in Figure 3.35 , you can set the memory display unit.
Table 3.17 describes the menu entries.
Figure 3.35 Word Size Submenu
Table 3.16 Memory Menu Description
Menu Entry Description
Word size Opens a submenu to specify the display unit size.
Format Opens a submenu to select the format to display items.
Mode Opens a submenu to choose the update mode.
Display Opens a submenu to toggle the display of addresses and ASCII
dump.
Fill Opens the Fill Memory to fill a memory range with a bit pattern.
Address Opens the memory dialog box and prompts for an address.
CopyMem Opens the CopyMem dialog box that allows you to copy memory
range values to a specific location.
Search Pattern Opens the Search Pattern dialog box.
Table 3.17 Word Size Submenu Description
Menu Entry Description
Byte Sets display unit to byte size.
Word Sets display unit to word size (=2 bytes).
Lword Sets display unit to Lword size (=4 bytes).