Freescale Semiconductor Microcontrollers - Manual (Page 403)

HC08 FSICEBASE Emulator
FSICEBASE Overview
403 Microcontrollers Debugger Manual
– 24 general-purpose logic clips, five of which can be used to trigger the bus state
analyzer sequencer
• Four software-selectable internally generated oscillator clock sources
• Command and response logging to disk files
• Assembly-language source-level debugging
• On-screen, context-sensitive help via pop-up menus and windows
• Emulation that allows multiple types of reset
System Components
The FSICEBASE system includes the basic components that you need to connect to an
emulation module (EM). You can also separately purchase additional components that can
enhance debugging and emulation.
Basic Components
The Freescale In-Circuit Emulator Base includes the following components
• Base station
The connectors on the top of the box let you connect an emulation module (EM).
• Cables, connectors, and adapters:
– crossover ethernet cable (connects directly to an Ethernet Network Interface Card
(NIC) on a PC)
– straight-through ethernet cable (connects to a hub or switch)
– Universal Serial Bus (USB) cable
– MON08 debug port (built into base station)
– external universal power supply and power supply cable
• System software
CodeWarrior IDE software, featuring an editor, assembler, and assembly source
level debugger
• Documentation:
– Freescale In-Circuit Emulator Base User Manual (this manual)
– CodeWarrior IDE User’s Manual
– Freescale In-Circuit Emulator Base Quick Start
– Online Help and PDFs
• Two logic clip cable assemblies: twisted-pair cables that connect the station module
to your target system. You can also use the cable assembly to connect a test fixture, a