Freescale Semiconductor Microcontrollers - Manual (Page 460)

HCS08 Full Chip Simulation
Peripheral Modules Commands
460 Microcontrollers Debugger Manual
Figure 18.34 SPI IN Buffer Display
SPDO Command
The SPDO command displays the output buffer from the SPI. A window is opened that
shows all the data that the SPI has shifted out. An arrow is used to point to the last output
value transmitted. The maximum number of output values that the buffer holds is 256
bytes.
Syntax
>SPDO
Example
>SPDO
View data from the output buffer for the SPI simulation.
Figure 18.35 SPI OUT Buffer Display