Freescale Semiconductor Microcontrollers - Manual (Page 498)

SofTec HCS08 Connection
First Steps Using the Stationery Wizard
498 Microcontrollers Debugger Manual
First Steps Using the Stationery Wizard
To take the first steps toward debugging with the CodeWarrior IDE and the SofTec
inDART-HCS08 using the stationery Wizard:
1. Run the CodeWarrior IDE with the shortcut created in the program group.
2. In the Microcontrollers New Project Wizard, follow the path to create a new project,
naming the project.
3. Click the Next button to open the New Project window.
4. In the Microcontrollers New Project window, choose HCS08 Family chip you are
working with from the list in the Derivative list box.
Figure 22.1 Wizard Connection Selection
5. From the Default Connection list box, choose the connection SofTec HCS08 to create
a new project from this stationery.
6. Click the Finish button - the CodeWarrior IDE opens.
7. Choose the menu option Project > Make.
8. Choose the menu option Project > Debug to start the debugger.
9. Start debugging.